559-234-0927 | Fresno CA Foam Roofing Services
Spray Foam Roof Coatings in Fresno HI



To protect SPF from moisture, foot traffic, and ultraviolet rays from the sun, protection is required. Damage is prevented from any of these elements with a protective coating that seals the foam.

Gravel or a layer of elastomeric coating is applied to protect the SPF once it has been applied to the proper thickness and finish specifications. Producing a weather resistant surface, the protective layer also makes the surface easier to walk on to provide normal maintenance without causing any damage.

White or light-colored roof coatings are the most common type of cool coatings that are applied over spray polyurethane foam and other deck surfaces. These types of cool coatings can be: polyurea, acrylic, silicone, or urethanes.

A thin layer of gravel spread applied over the foam is another protective method used by a few contractors and suppliers. Even though elastomeric coatings are more common, the gravel system has a high success rate. Coatings such as polyurea, acrylic, urethanes, butyl rubber, and silicone are spray-applied as either single or double component systems. It is important to check with an SPF supplier before choosing what type of coating material to use for they all vary in cost due to their different physical properties.

A base coat followed by a top coat is the typical way these coatings are installed. Granules that offer added protection against mechanical ultraviolet damage are often embedded into the final coat.

To keep your SPF roof system in peak performance for decades to come, coatings require replacement or maintenance. They can be removed or re-applied just like paint on the walls of your house.

During different climate conditions, an SPF roof will expand and contract, like most other systems. Because the SPF expands and contracts, the protective coating should have the same ability of expanding and contracting and it is of the utmost importance that the coating does this, otherwise cracks and damage can occur. The characteristic that matches the SPF and coating system to the climate and roof system is called elongation. For advice on how to properly choose a coating that elongates with SPF and details of said coating, contact your materials supplier.

Get a Quote For Your Project